Spec Mini Twin D-Trim w/ Carbon Discs Clutch Kit Civic / Integra B Series (Hydraulic Transmission)
**CONTACT TO PLACE ORDER AND FOR WAIT TIMES AS THESE ARE BUILT PER ORDER**
SPEC's Full Carbon on Carbon Twin and Tripple Disk Racing Kits are the pinnacle of clutch technology. SPEC's Carbon Kits feature an extremely light 3 lb stackup, common drive hub, but drives almost as smooth as a stock clutch. Due to their aggressive and chemical nature these kits are not recommended for daily use in cold climates (will wear a bit faster in cold). Carbon Twins and Tripples will need to be shimmed every 10 or 15K miles.
- Carbon Twin Kit TQ Capacity (ft lbs): 1100
- Carbon Twin Weight (lbs): 17
Includes Everything Needed for Install: Clutch, Flywheel, Standard or Hydraulic Bearing, etc.
Optional Billet Concentric Hydraulic Bearing Kit available
The SPEC Super Twin is for street and track use with extreme horsepower and torque (700-1500 ft lbs tq), offering near-stock drivability, tremendous life expectancy, a no shimming/setup bolt-in install and maintenance free operation. With all billet construction, these units are smooth and quiet. Rebuild-able by SPEC or the end user and replacement components. The SPEC Super Twin is constructed of aircraft grade aluminum and high carbon billet steel. Friction is provided by dampened, full-faced carbon graphite, organic, fiber and full metallic options are available. Flywheel and track-spec hardware are included.
Street, Drag, Pulling, Autocross
Multi-disc clutch and flywheel assemblies for limited street, drag race and road race applications. The Mini Twin assemblies are available in different clutch disc and flywheel materials, clamp loads, disc configurations and diameters which are recommended based on the type of usage the vehicle demands. The units are rebuild-able by SPEC or the end user. Types of driving: limited street, drag, drift, road racing, time attack, pulling and rallye.
Please note that some applications require a SOLID hub such as some stock flywheel applications. If you need a sprung hub then please specify this on our order form.
We are here to help you find the primo clutch and you are probably searching for clutches and have reached this page, then you doubtless have already decided you want a new clutch or new clutch component. The reasons for your search efforts can be myriad; such as not enough friction to hold your clutch and it has started slipping, or you smell a "burning" clutch, or your clutch may not be engaging when you push it in, or you may just be having a hard time pushing the pedal; or, much more gratifying , you are engaging in the wonderful sport of racing or drag racing and know you unequivocally need a high caliber performance clutch. All of the constant shifting that racing demands can be brutal on a clutch and performance drivers respect a clutch that instills confidence in the fact that they can meet the aggressive shifting demands of racing. Only an exceptionally high grade performance clutch can meet those requirements because they are the sole ones that can accommodate the power levels and temperatures inflicted on a clutch when on the track or doing performance driving. Because performance clutches generally utilize heavier springs and premium disc materials you are guaranteed a clutch that has exceptional clamping force and won’t hesitate to grab when it is critical to do so and that it will accomplish this quickly. Never fear, if you are not racing we know you are still entitled to a clutch that is smooth to operate, long lasting and an improvement over most factory installed clutches so that your driving experience is blue-chip. There are some essentials you need to bear in mind when deciding on a performance clutch and we are here to give you some information that you can utilize in making that significant decision.
First know there are three varieties of disk clutches, single (which is probably what you have from the factory) with a single friction disc working the pressure plate and flywheel, dual with an extra friction disc and a set of surfaces labeled a floater, triple discs with three friction discs, with torque capacity increasing with the number of discs from double to nearly two hundred percent. Next, the composition of the material in the clutch is of significant importance and your driving demands play a factor in making this decision. You should seek out the clutch with the latest in technological advances when it comes to disc material since previous clutch disc materials have been eclipsed by the new composites. Then there is the manufacturer and because we have incontrovertible confidence in them we would like to introduce you to SPEC, a inimitable company and one of the foremost designers and fabricators of clutches today, who can accommodate your clutch demands by presenting you with a plentitude of choices.
SPEC, first and foremost, is an American company so their clutches are fabricated right here and their materials and manufacturing techniques can be trusted; plus, their company goal is to build a “SANS PAREIL” clutch just for you. SPEC considers their main job to be the creation of a perfect marriage of clamp load. friction, diameter and rotating mass to yield a primo operating clutch and to do that for heterogeneous applications and you can be heartened by the fact that they are up to the challenge. SPEC designed seven stages of single disc clutches and up to eight stages of multi-disc clutches using the most advanced friction materials available so they are definitely ready for the task when it comes to accommodating your requirements. They have both the expertise and desire to make you a happy customer who will not hesitate to recommend their clutches to their friends. And if what your yearning for is just an upgrade or downgrade then SPEC fabricates excellent pressure plates, flywheels and flywheel friction plates that will assist you in achieving that goal with a top-notch product that is generally a less expensive alternative. If you are needful of a full clutch kit, depending on the kit you select, it will be inclusive of a performance pressure plate and sometimes a performance flywheel; plus, you are afforded the opportunity to upgrade to a billet flywheel for primo clutch performance. SPEC, an outstanding and dedicated company, can eclipse your expectations when it comes to clutches and we can help you get your SPEC clutch or component at a competitive price You will find a listing of the diverse SPEC clutch kits and clutch components on the our web site when you search for your part.
LIMITED WARRANTY: S.P.E.C., Inc warrants all products to be free of defects in materials and workmanship for normal use and service up to 120 days after retail purchase. SPEC reserves the right to examine any part returned for warranty claim to determine whether a defect in materials or workmanship exists in such product. SPEC liability is limited to repairing, replacing or crediting towards other product, and credits will not exceed the invoice total for the parts. Labor and storage charges are not products of SPEC and, therefore, will not be reimbursed for any reason. Final determination of the condition and suitability of the parts for uses contemplated by the buyer is a sole responsibility of the buyer. SPEC will not be liable for any damage or injury to persons or property that might be claimed as a result of improper installation or misuse of any part subject to this warranty. Return shipping to SPEC will not be pre-paid or paid for. Customer is responsible for return shipping for inspection. There are no warranties expressed or implied beyond those set forth above.
INSTALL NOTES: Unless using a new flywheel provided by SPEC, existing unit must be resurfaced prior to installation of the clutch product to ensure integrity of friction surface. Owner must also break in the new high performance clutch for a minimum of 450 miles, primarily city and/or stop-and-go driving, before full throttle engagement, drag launching or speed shifting. * FAILURE TO EXECUTE EACH OF THE ABOVE WILL HINDER CLUTCH PERFORMANCE AND VOID ALL WARRANTY!!! Unless otherwise instructed by written notice from SPEC, follow manufacturer’s instructions when installing clutch and flywheel products. SPEC recommends that all bolts be inspected before re-installation, and any bolts that have been removed and re-torqued multiple times replaced. SPEC will not warrant any component failure due to install error.
