Cart 0

Fuel Fill Neck Hose Kit

Radium Engineering

  • $69.95

This wire reinforced hose is designed specifically for fuel filling. The ID is 2-1/4" making it ideal for many applications including the Radium 20-0147 Remote Mount Fill Neck, shown below.   The hose is used to connect to a body-mounted filler, such as THIS ONE from Fuel Safe.

Unlike silicone fuel fill hose, this is convoluted permitting tight bends, as depicted below. 

For universal applications, the filler hose is 36" long that can be cut to length. A 304 Stainless Steel T-Bolt clamp is included that features a protective smooth inside and permits a 360 degree seal.


Inside Diameter: 2.25" (57.2mm) ID
Outside Diameter: 2.68" (68.1mm) OD
Length: 3 feet (914.4mm)
Working Pressure: 20-psi maximum
Burst Pressure: 90-psi mimimum
Bend Radius: 8" minimum
Tube Construction: Nitrile 
Reinforcement: Synthetic Fabric
Flex: Two Embedded Helical Wires
Cover: Neoprene Coated Fabric
Temperature Range: -40F to 212F
Standards: SAE 30R5
Made in USA 

We Also Recommend