Full Race 92-01 Civic Integra EG / EK / DC ProAm Traction Bar
Full-Race ProAm style traction bar system for B-series 92-00 Honda Civic and 94-01 Acura Integra incorporates an additional front motor mount. This prevents unwanted motor and transmission movement commonly seen on high output FWD vehicles. Engine vibrations will be increased somewhat with this type of motor mount. However, this mount can be easily removed in a few minutes with a basic set of hand tools. Simply install the mount when need be and remove it when it is not desired.
Full-Race recommends using the traction bars to gently pull the LCA towards the front of the car, just 1 or 2 turns. This allows a slight increase in caster, even from Left to Right
- ’92-’00 Civic with Honda B-Series motor
- ’94-’01 Integra with Honda B-Series motor
- B-Series ProAm bars in EG/EK/DC only fit with 1/2 sized radiators.
**Click on thumbnails for full size pictures**
This picture shows how the DC/EG/EK traction bar clevis MUST be mounted in line and level with the lower control arm.
DO NOT mount the clevis perpendicular to the control arm (like this) or any orientation other than in line and level with the lower control arm.
We Also Recommend
1000cc FIC Honda/Acura Fuel Injector Clinic Injector Set (High-Z) Previously 900cc Honda B, H, & D Series (except D17)
1000cc FIC Honda/Acura Fuel Injector Clinic Injector Set (High-Z) Previously 900cc K, S2000 ('06-'09)